Koldwater Technologies, LLC

Education is your Key to Career Success

CD-Rom & Web Based Training for the Electrical Controls Industry

Home


Our CD-Rom Based Products

SCORM 1.2 Compliant Applications

School Discounts

Student Discounts

About Us

Terms

Contact Us

 

 


30 Day Guarantee

 

Become a Fan on Facebook

 

 


 

Student & Military Discounts

Students enrolled in approved educational programs such as Community Colleges, Tech Schools, Universities and Apprenticeship Programs in The United States and Canada are eligible for student discounts (This does not include common High School enrollment). Proof of enrollment MUST be provided via Fax, eMail Attachment or mail. This proof may be a copy of YOUR student ID, a copy of your enrollment reciept, a copy of your grades or if you are enrolled in an Apprenticeship Program, a copy of your Apprentice Card.

Open your email client and attach your proof of enrollment...Members of the US Armed Forces my also qualify for discounts on specific products. Proof of enlistment must be provided via Fax, eMail Attachment or mail. This proof may be a copy of YOUR Military ID.

Your order will NOT be shipped until the required proof is received....


The PLCTrainer/LogixPro Bundle - Single PC License
$99.00

Includes Analog instruction, an area that has been overlooked by most training materials.

The PLCTrainer includes a Laboratory Manual full of proven practical applications that allow the student to gain an understanding of the PLC's Instruction Set. The screens demonstrating the Instructions have a look and feel of RSLogix, plus if you own a copy of RSLogix you can open it from within The PLCTrainer !

Introduction to PLCs
Input/Output Modules
Safety Circuit
PLC Processors
Numbering Systems & Codes
Basic Programming
Timer Instructions
Counter Instructions
Program Control Instructions
Data Manipulation
Math Functions
Shift Registers & Sequencers
Analog Inputs & Outputs
Networks
Human Machine Interfaces
Trouble Shooting
Lab Manual
Ability to Call RSLogix or LogixPro
Book Marking
Password Protected Student Log File
Glossary
Trouble Shooting Flow Chart
Video Animations



The CLXTrainer - Single PC License
$129.00

The ControlLogix Training Software includes the following units of instruction...

Introduction to ControlLogix
Overview of RSLogix5000
ControlLogix Architecture
ControlLogix Memory
Project Organization
Data File Types
ControlLogix Bit Instructions
Timer Instructions
Counter Instructions
Data Collecting
File/Data Manipulation
Shift Registers/Sequencers
Program Control Instructions
Configuring Analog Modules
Structured Text Programming
Function Block Programming
Documenting Programs
Communications

-- Final Exam
-- Laboratory Manual
-- Password protected Student Log File
-- Ability to print Certificate of Completion
-- Ability to print test responses


The ViewTrainer - Single PC License
$119.00

Human Machine Interface
"The ViewTrainer". This new HMI Training covers RSView32 Works Software.

Human-Machine-Interfaces and SCADA (Supervisory Control and Data Aquisition) systems are becomming more important than ever in the world of industrial controls. The ViewTrainer provides you with the knowledge to begin building these complex systems.

This new HMI Training (RSView32) Software includes the following units of instruction..
RSLinx Communications
DDE Topics & Excel
Creating a new RSView Project
Graphic Displays & Animation
Alarms
Data Logs
Run Mode
Interactive Quiz

-- Final Exam
-- Laboratory Manual
-- Password protected Student Log File
-- Ability to print Certificate of Completion
-- Ability to print test responses


The VFDTrainer - Single PC License
$99.00

Variable Frequency Drives are becoming the standard in industry for precise control of motors and rotating equipment. The VFDTrainer is a tutorial on the basic operation, installation, programming and trouble shooting of these units.

This new VFD Training Software will include the following units of instruction..

AC Motors
Uses of Variable Frequency Drives
Parts and Operation of a VFD
VFD Control
VFD Installation
VFD Start-up
Soft Starters
Trouble Shooting
Interactive Quiz

-- Final Exam
-- Laboratory Manual
-- Password protected Student Log File
-- Ability to print Certificate of Completion
-- Ability to print test responses


The TSTrainer - Single PC License
$69.00

The TSTrainer is a multi-media computer-based training module design to instruct the user in proper control trouble shooting techniques. Drill and practice is used to reinforce skills. The realistic control systems include both electro-mechanical motor control as well as PLC control. A virtual meter is used to diagnose the faults within the systems. Below are a few screen shots of this exciting new training application! Hands-On Live Voltage Troubleshooting without the Risk...

Includes

3 Basic Control Circuits Problems
5 Motor Control Problems
8 PLC Control Problems
A 'Virtual Meter' with moveable leads
Lab Manual
Certificate of Completion

Password Protected Student Log File

 


The MCTrainer - Single PC License
$89.00

A CD-ROM based training application on Motor Controls. Includes the following

Wiring Diagrams vs. Ladder Diagrams
Ladder Diagram Logic & Basic Rules
Solenoids
Electromechanical Relays
Introduction to Timers
Control Applications
AC Motors
Sensing Devices
Preventative Maintenance
Safety
Two Wire Controls
Three Wire Controls
Separate Controls
Hand-Off-Automatic Controls
Sequence Controls
Reversing Controls
Jogging Controls
Timing Relay Circuits
Starting Methods
Deceleration Methods
An Introduction to PLCs
Interactive Quiz
Certificate of Completion
Laboratory Manual
Student Management System
Ability to call The Constructor *
Bookmarking

*Note: The Constructor is NOT part of The MCTrainer. It must be purchased seperately.


DeviceNet Tutor-Level 1 - Single PC License
$89.00

The Level 1 release covers such topics as:

What is DeviceNet
Component Identification
Physical Media
Power Supplies
Grounding
Tips & Tricks
Glossary

The tutorial will include a Laboratory Manual for use by Tech Schools, Community Colleges,
Company Training Departments, Apprenticeship Programs and individuals.


The FPTrainer - Single PC License
$89.00

The Fluid Power Trainer is a multi-media computer-based training module design to instruct the user in basic fluid power principles. This tutorial includes the following units of instruction.

Basic Fluid Power Principles
Fluid Power Symbols & Schmatics
Cylinders
Control Valves
3-Way & 4-Way Valves
4-Way & 5-Way Valves
Pumps
Misc. Components
Trouble Shooting.
A Lab Manual and Answer Key are also included in the application.

 


The Constructor - Single PC License
$159.00

The Constructor program makes the creation, testing, trouble-shooting, teaching and printing of electrical ladder diagrams, schematics and one line diagrams fast and easy. The multimedia -active Constructor tutorial yystem or ACTS system and Daily Tips makes learning to use this powerful software much faster and easier. Powerful zooming features for faster editing and easier viewing of your electrical diagrams. Over 50 color schemes allow you to set your personal color preference.

This program is unique in its ability to test an electrical circuit. You can see the power flow in the diagram and hear the sound effects when a motor or siren is energized. Hear up to 20 different sounds at once. An optional additional sound library allows you to add 126 more sound effects to your diagrams. Your complete circuit can be tested from the three phase power components to the control circuit. The built-in symbol libraries of over 600 symbols makes the creation of your diagrams fast and easy. Diagrams of over 300 rungs may be created in this version. The built-in symbol editor allows you to create your own custom symbols. Once designed, any circuit can then be virtually energized and operated on your computer monitor. The circuit will perform the same as a hard wired electrical circuit. The design can be edited and re-tested saving valuable time when it comes to hard wiring circuits and trouble-shooting scenarios. Automatic legends and borders allow you to make professional looking diagrams quickly. You can print your ladder diagrams out on your choice of any printer or plotter that Windows supports. The diagram may be saved to your hard drive or a floppy disk for easy reference or modification. You can also save images from within The Constructor program as bitmap files. The bitmap files can then be used for printing or imported into other programs.